Need help checking this fit? Contact the team before ordering.

ISOFIX and child-restraint access: All Tuff Skin seat covers are ISOFIX compatible. For other ranges, check the selected product’s information. A seat cover does not add, replace or certify anchor points. Keep access to applicable factory ISOFIX or child-restraint anchors unobstructed and follow the vehicle and child-restraint manufacturers’ instructions.

At a Glance

• Product range: Tuff Skin Neoprene
• Vehicle: BYD Shark 6 Dual Cab
• Model period: November 2024 onwards (11/2024–On)
• Seat coverage: Front seats only; driver and front-passenger seats
• SKU: TSSH6F4
• Colour: Black
• Material: Durable 30% rubber-blend automotive neoprene
• Fit type: Vehicle-specific, made-to-fit
• Surface protection: Water- and stain-resistant; not completely waterproof
• Lining: Smooth protective inner lining
• Backing: Anti-slip
• Installation: Secure vehicle-specific fastening system, including applicable Velcro and clips
• Airbag compatibility: Deploy Safe stitching on applicable front-seat side-airbag seams
• Headrests: Applicable front headrest cover components included in the confirmed vehicle-specific pattern
• Australian designed: Yes
• Workmanship warranty: Two years
• Not included: Rear-seat covers, floor mats and separately sold accessories

Made-to-Fit Neoprene Protection for Your Shark 6 Front Seats

A modern dual cab can be refined and still work hard. In a BYD Shark 6, the front seats handle the commute, the passengers, the occasional muddy jacket and the everyday movement of getting in and out. Protecting that upholstery early can help preserve the look of the cabin as those kilometres add up.

Tuff Skin Neoprene Front Seat Covers provide an extra protective layer for the BYD Shark 6 Dual Cab from November 2024 onwards. The black, vehicle-specific set is designed around the factory front seating configuration, with airbag-compatible construction where required and a flexible feel for normal driving.

Unlike a universal seat wrap, this set is manufactured to suit the nominated seating layout. It is a ready-made, made-to-fit product, not a custom order measured and manufactured for an individual vehicle after purchase.

Tuff Skin Neoprene: Flexible Protection for Everyday Wear

Tuff Skin uses durable 30% rubber-blend neoprene with a smooth protective lining. The flexible material helps the cover follow the seat surface while forming a practical barrier against many of the everyday messes that would otherwise contact the factory upholstery.

• Dust, grit and everyday road grime
• Damp workwear and wet-weather clothing
• Sand, mud and outdoor debris brought into the cabin
• Minor food and drink spills when cleaned promptly
• Perspiration and repeated contact during long journeys
• Pet hair and everyday passenger mess
• Friction from high-frequency entry and exit

The covers are intended to help protect the original seats, not to make them invulnerable. Sharp objects, heavy abrasion, very hot items and prolonged wetness can still cause damage. Keeping dirt and moisture from accumulating below the cover is important.

Features That Matter Beyond the First Impression

• Vehicle-specific fit: The pattern follows the stated factory front-seat configuration more closely than a loose universal design.
• Durable rubber-blend neoprene: Flexible material intended for a practical balance of protection and daily comfort.
• Water- and stain-resistant: A useful defence against incidental moisture and common spills, provided they are addressed promptly.
• Smooth internal lining: A protective layer positioned against the factory upholstery.
• Anti-slip backing: Helps reduce shifting as people enter, exit and move on the seat.
• Secure fastening: Velcro, clips and/or the correct vehicle-specific points help maintain a neat, reliable fit.
• Deploy Safe construction: Applicable front covers use specially designed airbag-compatible seam placement.
• Black finish: A practical, coordinated appearance suited to work and everyday vehicle interiors.
• Australian-designed: Developed with everyday Australian vehicle use in mind.
• Two-year workmanship warranty: Coverage for eligible workmanship defects under the applicable terms.

Vehicle-Specific Fit for the BYD Shark 6

This product is for the stated BYD Shark 6 Dual Cab model period, not for every BYD vehicle or a generic ute seat. The right fit depends on factory seat shape and the placement of headrests, airbags and controls. Check the vehicle configuration and factory equipment before purchase.

Fitment is defined by the vehicle and its original seat configuration, not just the model name. Reupholstered, replacement or aftermarket seats and changes to factory equipment may alter suitability. Confirm the cabin layout and seat features before ordering; if in doubt, check with the Classic Fit team.

Front Seats Only: Exact Product Coverage

This SKU, TSSH6F4, provides the cover components specified for the vehicle's two front seating positions:

• Driver's seat base and backrest pieces required by the front pattern
• Front-passenger seat base and backrest pieces required by the front pattern
• Applicable front headrest cover components
• Fastening pieces and instructions supplied for the vehicle-specific set
• Excluded: The rear seating row and its headrests, floor mats and unspecified console accessories

Product coverage describes the seat positions, not a promise that every factory accessory or optional seat feature has a cover. Check the exact supplied fitment information if your vehicle has non-standard equipment.

Deploy Safe Airbag-Compatible Front Covers

Applicable front covers use Deploy Safe airbag-compatible stitching around the designated seat-mounted side-airbag deployment zones. This is a safety-critical feature: the special seam is not decorative and must not be adjusted.

Fit the driver and passenger covers to the correct seats and in the orientation shown in the instructions. Do not sew over, reinforce, glue or otherwise interfere with the designated airbag seam. If an aftermarket seat or altered restraint arrangement is fitted, obtain fitment confirmation before use.

The cover does not change the vehicle manufacturer's operating instructions. All factory seatbelts, airbag zones and safety equipment must remain unobstructed.

A Better-Fitting Layer with Anti-Slip Backing

Loose covers can bunch up and require repeated repositioning. The vehicle-specific Tuff Skin pattern, anti-slip backing and secure fasteners are designed to help the covering sit neatly against the factory seat contours.

Use the appropriate fastening points, not a convenient nearby cable or mechanism. After installation, check the seating surfaces, backrest, headrest position and every adjustment function. Retighten fasteners or reposition the cover as required after initial use.

Water Resistance Explained Without Overpromising

Water resistant is not waterproof. Tuff Skin neoprene helps protect against minor splashes, damp clothing and ordinary spills, but prolonged saturation or a large liquid spill can still reach the upholstery. A seat cover cannot substitute for promptly removing moisture.

Wipe incidents up as soon as practicable. If moisture reaches the space below the material, remove the cover when safe to do so and allow both the cover and the original seat to dry completely. Do not leave wet equipment pressed against the material for extended periods.

Factory Seat Controls and Equipment

The covers are intended for the specified original seating layout. Installation must preserve access to factory seatbelt buckles, adjustments, relevant controls and seat-mounted safety systems. Test the seat movement and inspect for trapped fasteners before driving.

Where a vehicle has heated or ventilated seats, optional trim equipment or integrated electronics, check compatibility and the owner's manual rather than assuming the cover preserves the performance of every feature. Do not obstruct an electrical connector, sensor or moving rail.

Ready for the Commute, the Job and the Weekend

The Shark 6 combines everyday passenger comfort with the practicality of a dual cab. Its seat protection should be just as versatile: resilient enough for damp clothing and dusty work gear, but neat enough to suit day-to-day driving.

• Daily commuting: Helps reduce wear from frequent driver entry and exit
• Family transport: Shields the front upholstery from ordinary food crumbs and incidental mess
• Work and leisure: Helps reduce direct contact with sand, dust and wet-weather gear
• Cabin upkeep: Makes common surface cleaning less disruptive when spills are dealt with promptly

Low-Key Black Finish, Thoughtful Everyday Protection

The fitted black material keeps the focus on the Shark 6 cabin rather than on loose seat-cover fabric. The anti-slip backing and secure attachment system help keep the covers positioned correctly, while the smooth lining provides an additional protective layer against the original seats.

For long-term presentation, regularly remove loose debris rather than rubbing it into the surface. The objective is to help keep the upholstery beneath the covers in better condition as the vehicle works through normal daily life.

Care, Cleaning and Maintenance

• Vacuum or brush away dry dust, sand and crumbs before wiping.
• Blot or wipe incidental spills promptly with a clean damp cloth.
• Spot-clean using a mild detergent where the supplied care instructions permit.
• Avoid bleach, harsh solvents, abrasive cleaning tools and excessive heat.
• Do not tumble-dry; dry naturally in the shade where the supplied instructions allow removal and cleaning.
• Make sure the original upholstery is dry before refitting the covers.
• Check that the fasteners, seat movement and designated airbag seams remain correctly positioned.

Always follow the specific instructions supplied with the set. Routine cleaning is easier when dirt and moisture are dealt with before they can accumulate.

Australian Designed with a Two-Year Workmanship Warranty

Tuff Skin Neoprene is Australian designed and selected for practical use across commuting, work and touring. The covers carry a two-year workmanship warranty, subject to correct installation, normal use, suitable care and Classic Fit's applicable terms.

A workmanship warranty is not an assurance of waterproofing or freedom from every type of physical damage. Follow the care and fitting guidance to protect both the cover and the original seat.

Complete Your Interior with the Matching Rear Seat Set

This listing covers the front row only. If your vehicle also needs rear-row protection, view the separate BYD Shark 6 Dual Cab Tuff Skin Neoprene Rear Seat Covers (SKU TSSH6R4). You can select the products separately; do not assume an automatic combined-set discount unless one is shown at checkout.

The relevant rear cover should be matched to the same vehicle model period, material and seat arrangement. The separate SKU makes it easier to replace or purchase only the row that needs protection.

Product Specifications

• Brand and range: Classic Fit – Tuff Skin Neoprene
• Vehicle application: BYD Shark 6 Dual Cab
• Fitment period: 11/2024–On
• Material: 30% rubber-blend neoprene
• Colour: Black
• Coverage: Driver and front-passenger seating positions
• Seat configuration: Original factory front seating, subject to model and option confirmation
• Water protection: Water- and stain-resistant
• Airbag design: Deploy Safe stitching for applicable front-seat side airbags
• Backing and lining: Anti-slip backing with smooth protective inner lining
• Fastening: Vehicle-specific secure fastening system
• Design origin: Australian-designed
• Warranty: Two-year workmanship warranty
• Part number / SKU: TSSH6F4

Frequently Asked Questions

Will these fit all BYD models?

No. This fitment is for the BYD Shark 6 Dual Cab from November 2024 onwards. Other BYD models need their own confirmed fitment.

Does this product include the rear passenger seat?

No. SKU TSSH6F4 is the separate front-seat set. The corresponding rear-seat product is SKU TSSH6R4.

Are these completely waterproof?

No. Tuff Skin neoprene is water- and stain-resistant. Large or prolonged spills should be removed promptly so moisture does not remain beneath the covers.

Are these covers for a custom-made-to-order installation?

No. They are ready-made, vehicle-specific made-to-fit covers for the stated factory configuration.

Are these universal seat covers?

No. They are vehicle-specific made-to-fit covers for the stated BYD Shark 6 Dual Cab factory front seating configuration.

Are these made individually after I order?

No. This is a ready-made product manufactured to a vehicle-specific pattern, not a custom, made-to-order job.

Are the covers safe for seat-mounted side airbags?

Applicable front pieces use Deploy Safe airbag-compatible stitching. Correct installation and unaltered designated seams are essential.

Are these neoprene covers waterproof?

No. They are water- and stain-resistant, not completely waterproof. Clean liquid spills promptly and dry any trapped moisture.

Which seats are included?

The driver and front-passenger seats, with the components required by the vehicle-specific front pattern. Rear-seat covers are separate.

What is the material composition?

The established Tuff Skin specification is durable 30% rubber-blend neoprene with a smooth protective lining.

Are headrest covers included?

The set includes applicable headrest components required by the confirmed front pattern. Exact coverage depends on the factory configuration.

Will the factory seat controls still be accessible?

They must remain accessible and fully operational after installation. Check all movement and equipment before driving.

Can I use these on aftermarket or reupholstered seats?

Do not assume so. The fitment is based on the stated factory seat shape and safety equipment. Confirm any modified arrangement with Classic Fit.

Can they be cleaned in the washing machine?

Do not machine-wash unless the supplied care guide expressly permits it. Routine maintenance is vacuuming and mild spot-cleaning.

Is there a matching rear-seat cover?

Yes. The matching BYD Shark 6 Dual Cab rear-seat product is a separate listing with SKU TSSH6R4. Confirm the vehicle configuration before ordering.

How long is the warranty?

The covers have a two-year workmanship warranty under the applicable Classic Fit terms.

Protect Your Shark 6 Front Upholstery from Everyday Wear

Order Tuff Skin Neoprene Front Seat Covers – TSSH6F4 for the specified BYD Shark 6 Dual Cab. Confirm the exact factory seating configuration, then select the matching rear set separately if you want protection across both rows.

If you need help with your order, fitment advice or product information, you’ll find everything you need below.

Contact Us

Have a question or need assistance?
Contact the team.

Shipping Information

Learn about dispatch times, delivery estimates and tracking.
View shipping details.

Returns & Refunds

Information on returns, incorrect items and warranty processes.
Read our returns policy.

Warranty & Product Guarantee

Find warranty periods for our neoprene and sheepskin seat covers.
View warranty details.

Find My Vehicle

Check which seat covers suit your make and model.
Find your vehicle.

Help Me Choose

Which material is right for you?
Compare materials.